HL -C one color printing rotary die cutting machine
Function and characteristic:
Feeder Unit
1. Air suction assisted automatic feeding system, the wind force is strong and the suction wind is adjustable.
2. Brush dust removal device can remove dust particles on the cardboard surface.
3. Manual adjustment of the front cover, electric adjustment of rear baffle position, and electric adjustment of side baffle position.
4. Double row groove glue flower roller combination feed paper. The paper roller design has pneumatic cushion device, which can adapt to the change of cardboard thickness, and avoid the damage machine when many pieces of cardboard come in.
5. Set the planned production quantity. When the plan is completed, the system automatically stops the feed and sends out a warning signal.
6. The set up time is around 5 minutes, the rear baffle and side baffle are both adjusted by electric, just the front baffle is adjusted by manually.
Print unit
1. The surface of the printed roller is marked with a sticky plate, with a center reference line horizontally, and the printing roller is balanced and corrected, and the surface is ground and hard chrome polished. With the quick change of the device with foot switch, it is easy to install for the printing roller, the Adjustment of circumferential direction can be adjusted by computer, and also can adjust by foot switch.
2. The press roller adopts double plate welding, balance correction and surface hard chromium plating. The installation USES the cross section, the free key connection structure, the clearance adjustment also maintains the gear normal tooth and.
3. The rubber roller is high quality material, which can compensate the force deformation and improve the ink transfer effect. The net roller adopts high quality steel, the surface is hard chromium, the DPI is 220 first unit -250 second unit.
4. Pneumatic lifting screen roller to prevent printing plate repeated inking and short time stop, the ink drying in the network roller hole.
5. Phase adjustment: the printing roller is equipped with automatic return to zero device and the computer input can be used for the 360-degree phase adjustment in the work or down state. For the Horizontal adjustment of printing roller, it is Electric adjustment and It is with automatic return to zero device, also it has the hand wheel, actually the adjustable distance is 8mm.
6. Use the pneumatic diaphragm pump to pump the ink, and add the ink cup to prevent the ink splashing and exhaust, automatic circulation cleaning and automatic ink.
7. Equipped with automatic inking device, can realize the stop ink function.
8. Can each unit printer has a flexo plate washing system? – is it possible?
9. The set up time is around 5 minutes for each printer unit.
Die Cut Unit
1. All rubber pads are made of Taiwan Max Dura brands. It is made of imported materials and is very durable.
2. The deceleration box type transmission, the rubber roller can move left and right Automatically when the machine is working and is about 45 mm, Can make the roller wear average distribution. which can greatly increase the service life of the rubber roller.
3. Unique speed difference compensation device, no matter how changes in the diameter of the rubber gasket, rubber roller speed difference compensation device can make the optimal force with slide template roller, so that the surface of the rubber gasket speed completely cartons and manipulation of the knife mold die cutting and cutting die shape.
4. Adjust the phase computer phase adjustment of the template roller.
5. The set up time is around 5 minutes.
Product Detail
Project | 920 | 924 |
Max speed (pcs/min) | 450 | 400 |
Feeding precision (mm) | ±1 | |
Min Sheet size (mm) | 300×600 | |
Max sheet size (mm) | 860×2100 | 860×2500 |
Skip Sheet size (mm) | 1200×2100 | 1200×2500 |
Max printing area (mm) | 900×2000 | 900×2400 |
Printing precision (mm) | ±0.5 | |
Plate thickness (mm) | 7.2 | |
Positive knife (mm) Negative knife (mm) | 130×130×130×130 | |
230×65×230×65 | ||
Max slot depth (mm) | 230 | |
Increase the blade, increase the slot depth | ||
Slotting precision (mm) | ±1 |
Company Detail
Production Progress
FAQ
Our Exhibition