HL-C Automatic high speed print slot machine
1) 360 degree electrical phase adjustment, braking motor 0.37Kw, 200 dots coder.
2) Pneumatic pump for ink supply.
3) Pneumatic single unit lock, and the whole machine general lock.
4) Units electrical moving with electromagnetic safety clutch.
5) Ink roller pneumatic lifting and automatic ink distribution.
6) Pneumatic inking.
7) Automatic counting.
8) Moving safety alarm.
9) Automatic lubricant supply.
10) Units movement driven by the printing unit, and the die cutting unit is fixed, which improves the stability of the whole machine.
1. Paper brush dust adopt removal device, can remove impurity on printing cardboard the surface, improve the quality of printing .
2. 45 # seamless steel tube, parcel wear-resisting rubber, and do dynamic balance correction.
3. Down roller, external diameter ɸ 140 mm, embossing and hard chromium plating, and do dynamic balance correction
4. Feeder Paper roller gap dial manual adjustment, adjustment range 0-12 mm.
5. The former feeder paper rubber roller (elastic rubber roller) for dynamic lift and fall, automatic voltage regulator, can reduce the strength fracture of the corrugated board.
1) On the print unit, mounted terminal box controlling production counting, machine speed and displaying the products quantity.
2) The forme roller has been tested by dynamic balance, which makes it running stably. The printing distance can be adjusted manually, and can lock by itself, adjust arrange is 2-12mm. Also, there are coordinate lines on the forme roller, which makes it easy to paste the forme. And the forme roller can be adjusted in axial direction for 10mm.
3) Adopting 360 degree electrical adjustment, and can adjust during working or while stopping, VFD control. And two adjusting modes: automatic and manual, and during automatic adjusting, the parameters values can be set on the phases meter, then pressing related buttons to make it reach the right position automatically. What’s more, the unit locking cylinders make each unit can return the correction position after separating.
4) Special transmission mode makes the inking even, clear without ink depositing.
5) Pneumatic diaphragm pump supplying ink, and the ink quantity can be adjusted by air pressure, even ink supply, easy clean and saving ink.
6) Inking by rubber roller and anilox roller, and driven directly by the forme roller gear, which ensures the same linear speed.
1. Locking cylinder structure. When the slotting unit separates from the printing unit, the knife disc position can be locked, then when the two units close together, it can keep at the same position. And there are gears on the slotting knife shaft to make the knife discs easy to move.
2. The phase positions adjustment is the same as do in printing unit.
3. The thickness of the slotting knife is 7mm, alloy material.
The machine technical Parameter
Max speed (pcs/min)
Feeding precision (mm)
Min Sheet size (mm)
Max sheet size (mm)
Skip Sheet size (mm)
Max printing area (mm)
Printing precision (mm)
Plate thickness (mm)
Max die cutting size (mm)